The 19" jig is set-up for pin spacing of 1-1/4" on center. The jig can be adjusted for drilling at either 2-1/2" or 1-15/32" from case edge. Included is the jig and 1/4" self centering brad point bit. You can also drill 5mm holes by swapping out the 1/4" self centering bit with a 5mm self centering bit. 5mm bit SOLD SEPARATELY.
- Kit Includes; 19" Jig and 1/4" self-centering brad point bit.
- Jig is set-up for pin spacing of 1-1/4" on center.
- Can be adjusted for drilling at either 2-1/2" or 1-15/32" from the case edge.
- Indexing holes keep alignment accurate as you drill along any length board.
- 5mm holes are possible by changing bit with 5mm self centering bit. SOLD SEPARATELY